Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Interested
Posted
Hats off to Doyle and Linda for providing such a wonderful way to netweek! Just a quick question ---- During my presentations to various designers, realitors, builders, etc., the question is asked about repairs. Will the plasters crack if the wall should crack? Are all of the plasters repairable. Will the repair be noticable? What do you give as an answer? One other question, in class we went over the prep work. The plaster goes on over painted walls, but can it go over wallpaper? One design center has wall surfaces covered with wallpaper and are interested in replacing it with the plaster. Thanks for any comments!
 
Posts: 3 | Location: Idaho Falls, Idaho | Registered: 19 September 2005Reply With QuoteEdit or Delete MessageReport This Post
Plaster Junkie
Posted Hide Post
Hi Suzanne,

If a wall cracks, just about any finish will crack too, be it plaster or paint. Is there a problem with walls cracking in your area?
Some of the plasters can be repaired. The ability of the applicator will make a large difference in how well the patch looks

Plastering over wallpaper is not a good idea.

Oh, BTW, you should sign up for the "Trained Applicator Section". You are missing a lot of the action. Wink

David
 
Posts: 619 | Location: Nashville, Tennessee | Registered: 19 November 2003Reply With QuoteEdit or Delete MessageReport This Post
Plaster Junkie
Picture of Fritz
Posted Hide Post
If the wall cracks,..the plaster will crack.

The limes will crack easier.

I have plastered over wallpaper a couple times

http://216.193.252.74/photopost/showphoto.php?photo=103...e=12&sort=7&ppuser=5

and this one, both over paper.

http://216.193.252.74/photopost/showphoto.php?photo=646...e=12&sort=7&ppuser=5

Serious measures need to be taken to ensure a solid substrate to go over.
 
Posts: 1282 | Location: Cincinnati, Ohio | Registered: 03 June 2005Reply With QuoteEdit or Delete MessageReport This Post
Plaster Junkie
Picture of Ken Merlock
Posted Hide Post
I agree with Scott,butI always go by (If I didn't hang the paper then have it removed as it is all in the wall prep.)Hope this help some what.
Ken.


Ken Merlock
The Studio of Uccello
www.studiouccello.com
 
Posts: 666 | Location: Milwaukee, Wisconsin | Registered: 21 April 2005Reply With QuoteEdit or Delete MessageReport This Post
Applicator
Picture of Stephen Huls
Posted Hide Post
Hello everyone.

Was reading the comments and there are alot of reasons for walls cracking usually in the angles and ceiling vaults, I have used a preventative product in order to stop any cracking. I am a Drywall Contractor, there is a product called No-Coat that is designed for stuctural strenth,
http://www.No-coat.com this has a wonderfull guarentee. I have never had a corner bead, or angle crack after using this product over the last 6yrs in dry or high moisture area's. On New Projects you may have this product installed by the drywallers, or it is easy to do your self. It is worth the time to protect our plasters over the years.
When working drywall I suggest this product to everyone, there is no equal in the industry for strength.
hope this helps.
the best way to fix a crack is to avoid a crack.

Stephen Huls
Monroe, Utah
 
Posts: 127 | Location: Monroe, Utah | Registered: 17 October 2005Reply With QuoteEdit or Delete MessageReport This Post
Plaster Junkie
Picture of Ken Merlock
Posted Hide Post
Stephen,First of all welcome to the forum,and thank you for your input.
Ken.


Ken Merlock
The Studio of Uccello
www.studiouccello.com
 
Posts: 666 | Location: Milwaukee, Wisconsin | Registered: 21 April 2005Reply With QuoteEdit or Delete MessageReport This Post
Interested
Posted Hide Post
Hi suzanne.I would never guaranty anything done over wallpaper.If you must do it,use an alcool primer prior to any application.If starting from scratch and are concerned with corners cracking I would recommend typical steel cornerbead screwed not nailed,mudded with a setting compound and coat the entire surface with an elastomeric primer.I would avoid the no coat product given the fact that i am currently replacing a large amount of it for a client who had it installed in an icf home.Drywall compound is not an adhesive and the rigidity of this product lends itself to tearing away with the slightest deviation.
 
Posts: 1 | Registered: 06 December 2006Reply With QuoteEdit or Delete MessageReport This Post
Plaster Junkie
Picture of Steve O
Posted Hide Post
Since we are on wallpaper, how much do you regularly charge for removal?
 
Posts: 638 | Location: DFW Texas | Registered: 22 March 2006Reply With QuoteEdit or Delete MessageReport This Post
Plaster Junkie
Picture of Lori B
Posted Hide Post
All wallpaper is different. Simply put, some is easy to remove, some is a royal pain and I wouldn't bid on it for a grand. Depends on whether or not someone sized it, what year it was put up (I've had really old wallpaper come off in little tiny pieces no matter how much dif or water I used)....To put it simply, I charge time and materials on this type of job. There is no way to estimate wallpaper removal, no formula for figuring out how long it will take. Luck o' the draw.
 
Posts: 308 | Location: Lehigh Valley PA | Registered: 23 October 2005Reply With QuoteEdit or Delete MessageReport This Post
Plaster Junkie
Picture of Steve O
Posted Hide Post
thanks lori
 
Posts: 638 | Location: DFW Texas | Registered: 22 March 2006Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community